Bent Pinewood Derby Axle - BSA 1.5 Degree bend with Easy Turn Screw Driver Slot - Polished Pre Bent for a Steering Axle (1 axle) by Pinewood Pro

$6.95
Usually ships in 24 hours
Product prices and availability are accurate as of 2019-02-21 12:04:07 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

Our Product Description

Model Cars is proud to offer this Bent Pinewood Derby Axle - BSA 1.5 Degree bend with Easy Turn Screw Driver Slot - Polished Pre Bent for a Steering Axle (1 axle) by Pinewood Pro.

Check out this detailed Bent Pinewood Derby Axle - BSA 1.5 Degree bend with Easy Turn Screw Driver Slot - Polished Pre Bent for a Steering Axle (1 axle) made by Pinewood Pro and listed by ModelCars.us. This interesting product is currently available - purchase securely and safely on modelcars today.

At this great price, Pinewood Pro has added some great extras to this Bent Pinewood Derby Axle - BSA 1.5 Degree bend with Easy Turn Screw Driver Slot - Polished Pre Bent for a Steering Axle (1 axle)

Manufacturer Description

The BSA Pinewood Derby Steering Axle with a 1.5 Degree Bend takes the stress out of getting your car to run straight or steered gently into the rail to make a rail rider car.


Axle includes an Easy Turn slot in the axle head to turn the axle with a screw driver so you can easily turn the axle without damaging it.

To win races, your car needs to steer straight so you do not lose speed when your car hits the guide rails. To make your car roll straight, replace one of your front axles with the BSA Steering Axle from Pinewood Pro. Orient the slot vertically, straight up and down. Then roll your car. If it is steering left or right, your car will lose speed.

To make it steer straight, simply insert a screw driver into the slot on your steering axles and turn it a few degrees left or right and roll your car again. Repeat until your car is rolling straight....it's as easy as that!


The Pinewood Derby BSA Steering Axle will help increase your car's speed while saving hours of time trying to fine tune your car's steering.

  • Package contains ONE single axle with a 1.5 degree bend for steering
  • Convenient Easy Turn screw driver slot for easy turning
  • Axle is polished
  • A single, polished BSA axle from the Offical BSA Cub Scout kit
  • In addition, axle head is cut back to reduce friction where axle contacts wheel

IMPORTANT NOTES: You only need a slight 1.5 degree bend to steer your wheels. THE 1.5 DEGREE BEND IS A VERY SLIGHT BEND THAT YOU CAN NOT SEE WITH THE NAKED EYE. However, if you roll the bent axle on a flat surface, you will see that it does not roll smoothly compared to an unbent axle.

Product Features

BSA bent polished pinewood derby axle (1 axle), bent 1.5 degrees for steering pinewood derby car wheels Convenient Easy Turn screw driver slot so you can easily turn the axle without damaging it. Pinewood derby polished axles with burrs removed and underside of axle head angled minimizes wheel contact friction A single, polished BSA axle from the Official Cub Scout pinewood derby kit Pre bent BSA axles with Easy Turn screw driver slot saves cost of an axle bender tool

User Reviews

Write a Review

Amazon Product Reviews

View our full range of Pinewood Pro products
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.